Are there any points to be careful about when filming GUNPLA?
Please refer to the following notes when filming the video:
・Adjust the camera focus (focal point) to ensure it is on the GUNPLA.
・Ensure that no objects are placed between the camera and the GUNPLA.
・When taking pictures, please set your smartphone to landscape mode.
・Begin filming by capturing the front of the GUNPLA, ensuring that the camera is at a height parallel to the model.
・Slowly move around the GUNPLA.
・Make two laps around the GUNPLA (approximately 1 minute for the first round and 30 seconds for the second round, totaling about 1 minute and 30 seconds).
・As you film, gradually raise the height of your smartphone to create an overhead angle of the GUNPLA.
・During filming, make sure that both the scan sheet and the entire GUNPLA stay within the frame.
・Ensure that the scan markers on the scan sheet are never cut off from the camera frame.
If you can not find possible solutions from FAQ, please send your inquiry from below.
Please send your messages regarding our network contents via the following form. We will forward them to the relevant department.
We do not provide individual replies, but your messages will be passed on to the appropriate department.